Pages Menu
Categories Menu


Simple Tips for Caring for Your Copy Machine

Posted by on Sep 1, 2016 in Blog, Business | Comments Off on Simple Tips for Caring for Your Copy Machine

Your business’s copy machine can be one of the more important tools that your employees will need to use. Unfortunately, there are many business owners that will simply overlook the maintenance needs of these devices. When a copy machine is not properly maintained, it can be at risk of suffering a number of potentially serious problems. To help you keep your copy machine working efficiently, you may want to keep these simple care tips in mind. Keep the Copier’s Exterior Clean One of the more effective steps that you can take to keep your copy machine safe from problems will be to regularly clean its exterior. When you clean the exterior, you will remove dust and dirt that could have otherwise worked its way into the copier’s interior. To avoid this problem, you should wipe down the exterior of the copier with a soft cloth every week. Clean Up Spilled Toner As Soon As Possible When you are changing the toner cartridges, it can be easy to spill a small amount of toner on the copier. Some individuals may avoid cleaning toner that has spilled immediately around the cartridge because it will not be readily visible. However, the toner can create dust as it dries, and this dust may spread to the interior components of the copier. Due to this threat, you will want to make sure that you are cleaning these substances up as soon as possible. Fortunately, this will be an easy task if you clean the toner before it can dry, as you will only need to wipe it away with a towel. If the toner has already dried, you may have no other choice but to scrape it away. Properly Store Your Paper Paper storage can play a critical role in preventing issues with the copy machine. Improperly stored paper can collect dust and moisture, which can cause serious problems for the copy machine. In order to keep your unit safe from these issues, you should make sure that your paper is stored in a dry location. It is possible to minimize dust by keeping the paper covered until you are ready to use it. Preventing issues with your copy machine does not need to be a complicated task for you to do because it is possible to avoid many common problems by taking a few simple steps. Knowing the benefits of regularly cleaning the exterior of the copy machine, cleaning spilled toner as soon as possible, and properly storing the copy paper can help you to prevent your unit from experiencing these issues....

read more

3 Important Questions To Ask When You Need To Buy A Plus-Size Casket

Posted by on Aug 12, 2016 in Blog, Business | Comments Off on 3 Important Questions To Ask When You Need To Buy A Plus-Size Casket

If you thought that it was difficult finding the right dress or suit for your loved one, you could easily find yourself even more frustrated when it becomes time to pick out a casket. Although more than one out of three Americans are obese, caskets to fit your plus-size friends and family members are not always easy to find. When you do find them, you may find that they are not all created equal. As a result, when you find a plus-size casket that you think will be an appropriate choice, it is a good idea to ask the following questions. #1-What Is The Maximum Weight That The Casket Can Safely Hold? Even though one of the first questions you may ask will relate to the maximum capacity of the casket, it is important to note that getting the right answer could be more complicated than you think. For instance, you will need to verify whether or not the maximum weight capacity includes the weight of the casket itself and its adornments. As part of your shopping decision, it will be best for you to know the approximate weight of the deceased at this time, so that you can be sure you are making the right choice.  #2-What Are The Measurements Of The Available Space? Just as one person might carry their weight differently while they are alive, the same continues to be true in death. As a result, you will find that merely knowing a person’s weight does not guarantee that the casket will fit them. Therefore, you should be sure to obtain the deceased person’s measurements, including their height, shoulder width and the dimensions of their hips. If you reference that information against the figures for the casket, you can be sure that you will not need to squeeze the person into their final resting space. #3-Will (And Should) The Casket Be Airtight? Deciding if the casket should be airtight tends to be a discussion that loved ones need to make after a death, as it is not always considered prior to that time. While many people think that an airtight casket will provide for a cleaner existence for the buried body, the truth is that airtight caskets can seal in harmful bacteria that contributes to a messier decomposition. Therefore, you should strongly consider whether or not you need to spend the extra money on an airtight casket when the benefits of doing so are limited and not always obvious. In conclusion, buying the right casket for a dear friend or family member is a difficult situation at any time. However, when that casket needs to be of an adequate size, strength, and construction for a plus-size person, that important purchase can become even more challenging. Therefore, you will want to ask the questions listed above of any casket you are interested in...

read more

3 Ways To Improve The Appearance Of Your Garage Door

Posted by on Jul 27, 2016 in Blog, Business | Comments Off on 3 Ways To Improve The Appearance Of Your Garage Door

If you are unhappy with the way your garage door looks, you have two options – do something to improve its appearance or replace it with a new one. Below, you will find a few ideas that can help you give your garage door a new look or even spruce up your new garage door. Vinyl Skins You can quickly give your metal garage door a flashy makeover with some vinyl skins. These skins have magnetic backing on them and stick to the surface of the garage door well. Although not popular yet, these skins can be purchased in different colors, sizes and patterns. These skins can transform your plain metal garage door into a set of carriage doors. Or, you can lighten the shade of your garage door to decrease the heat absorption during the summer and darken it to absorb the heat during winter. This is the perfect solution for renters. Your landlord may not permit permanent changes to the property, but the skins are easily removed and can be taken with you to your next home without causing any damage to the garage door on the rental home. Add Decals You no longer have to use paint and stencils to add decorative details to your garage door. Go to your local home improvement store and look for the decorative decals that can be placed on the walls in your home. These decals are removable and won’t damage the finish of the garage door. Before placing the decals on the garage door, do a thorough cleaning. Wash the surface with a mixture of equal parts of water and white vinegar. This will remove any dirt that is stuck to the finish without leaving any residue behind. When applying the decals, use a wide plastic putty trowel to smooth air bubbles out. This will help to ensure that they adhere to the surface and will not peel off. You can change these decals often to change the look of your garage door with the changing seasons. Add Hardware For a more permanent improvement, add some decorative hardware to the garage door. You can transform the look of the garage door with a couple handles placed at the center and decorative hinges placed along the outside. One line of paint going down the center and you can create the appearance of a carriage garage door without going to the expense of installing one. Talk with a local garage door expert such as Advanced Door Service to learn more about replacing your garage door or improving the appearance of your garage door....

read more

4 Reasons For An Owner-Operator To Get Commerical Truck Insurance

Posted by on Jul 7, 2016 in Blog, Business | Comments Off on 4 Reasons For An Owner-Operator To Get Commerical Truck Insurance

Are you tired of having to work all of the time to make long-distance deliveries for the trucking company that you are employed by? The solution to the problem might be to take the step of becoming an owner-operator. Before moving forward with becoming an owner-operator, it is important to look into getting commercial truck insurance. Take a look at this article to find a list of a few of the things that can be covered under a commercial truck insurance policy. 1. Property Damage if You Cause a Collision Commercial truck insurance will give you the financial means to pay for property damages if you cause a collision. Basically, rather than suing you for property damages, the other driver will be able to file a claim with your insurance company. The coverage will include paying for the other party’s vehicle to be repaired or replaced. 2. Other Drivers Medical & Funeral Expenses When you get commercial truck insurance, it will pay for the medical needs of other drivers when you are held liable in a collision. The coverage will pay for treatment up to a certain amount of money, which will be based on your specific policy. Any of the expenses that are not covered under your policy will have to be paid out of your own pocket. Commercial truck insurance can also pay for funeral expenses if it is necessary. For instance, if the driver or passengers in his or her vehicle suffer from fatal injuries, your insurance policy will cover the funeral expenses. 3. Damaged Cargo One of the things that can happen as an owner-operator is cargo getting damaged before being successfully delivered. For instance, if a customer pays for products to be delivered it is possible for them to get damaged in a collision or from bad weather overturning the truck. Cargo insurance will allow you to pay the customer back without having to dig into your own personal finances, depending on the coverage amount. 4. Uninsured Motorist Coverage You will have financial protection if you happen to get into an accident at the fault of an uninsured driver. Basically, uninsured motorist covered will cover the expenses that may accumulate from your truck getting damaged and medical bills. Uninsured motorist coverage is also good to have because even if you move forward with suing an uninsured driver after a collision, there is no guarantee that he or she will be able to pay anything. Speak to a commercial insurance company, such as Metropolitan Insurance Service Consultants, about coverage for your truck as an...

read more

How To Prevent Vinyl Graphics From Damaging Your Car’s Paint Job

Posted by on Jun 25, 2016 in Blog, Business | Comments Off on How To Prevent Vinyl Graphics From Damaging Your Car’s Paint Job

Vinyl graphics — which are often designed to be showcased on cars so that people can advertise their businesses — can be quite effective. However, one thing that you might be worried about is the vinyl graphic damaging your car’s paint job. These are a few tips for preventing this from happening. Only Use Graphics That are Designed for Use on Cars First of all, when ordering vinyl graphics, make sure that you only use graphics that are designed to be used on cars. Some graphics are designed to be applied to windows or other surfaces and might damage your paint job. Those that are designed for use on cars should be less likely to cause problems for your paint job. Wash Your Car First Before applying the graphic, make sure that your car is nice and clean. If you apply the graphic on top of sand, dust or other debris, you could encourage scratching. Plus, you will probably want your car to look its best when you are showing off your new graphic! Don’t Put Vinyl Graphics on Recently Painted Cars Have you had your car painted recently? If so, you may want to talk to a professional from a body shop before applying a vinyl graphic. A just-painted car can still be just slightly “tacky,” which you may not notice by touching your car yourself but which could be affected by a vinyl graphic being stuck to the exterior of the vehicle. Your body shop professional should be able to give you some insight about the proper waiting period before putting vinyl graphics on your car. Keep Your Car Out of the Sun One concern that you do have to think about is your car’s paint job fading at an uneven rate when there is a vinyl graphic applied to the exterior. One way to help prevent this — and to maintain your paint job in general — is to avoid parking your car directly in the sun when you don’t have to. Instead, try parking in a garage or under a carport, or parking underneath a tree, where it’s shady. As you can see, there are steps that you can take to prevent vinyl graphics from damaging your car’s paint job. Then, you can enjoy the perks of having vinyl graphics on your car, and you don’t have to worry about your car’s paint job showing additional signs of wear and tear because of it. Contact a company like Nesper Sign Advertising Inc for more...

read more

Does It Make Sense To Do A DIY Paint Job On Your Car?

Posted by on Jun 3, 2016 in Blog, Business | Comments Off on Does It Make Sense To Do A DIY Paint Job On Your Car?

A fresh coat of paint may sound like a great idea for old, faded cars – that is, until you look at the price tag, which may start you thinking about cutting cost-saving corners, like doing it yourself. A quick coat of spray paint may only be a few hundred dollars, but keep in mind that flaws in the old paint may still show through. For example, a car with a badly cracked clear coat may not only come out looking rough, but it might not hold onto the new paint particularly well. The best option is to strip the car down to bare metal, then re-prime and repaint from the beginning. While this full process can cost several thousand dollars with a professional, can you really save anything by painting it yourself? What materials and tools do you need? Whether you’re completely repainting or doing a paint over, you’ll still need to buy several gallons of paint and clear coat, plus primer for a repaint. Next, you’ll need masking materials to keep paint off your trim and windows, tools to either sand or sand-blast your car (for a total repaint), and an airbrush for painting and clear coating. Equipment and air compressor rentals can help reduce the cost of sanding and airbrushing. This gives you access to high-quality, high-capacity air compressors for a relatively low daily fee, leaving paint as your primary expense. Do you have an appropriate place to paint? Time is money, and the location you choose may be the deciding factor in just how much time and aggravation you spend on the job. Painting should always be done in a clean, well-ventilated area. Outdoors any little bit of debris floating on the wind will become a permanent part of your car’s finish. Unless you want something decorated with dead leaves, dead bugs, dandelion seeds and other airborne goodies, it’s best to keep it inside. On the other hand, cars are typically spray painted, so the interior of a garage could end up matching your car unless you take the time to drape the entire interior with painter’s plastic, or you can spend time on in-depth cleanup once the job is done. If you have a lot of free time, this may be a minor issue. If you’re a busy professional or family person, it’s a whole different story. How much time can you devote to painting? A simple spray-over without stripping can realistically be done in a weekend, including time to mask, apply multiple coats, and let them cure. Properly stripping and re-priming can take over three times as long because – aside from the extra work – there are extra layers that have to properly cure before you can add the next. Bear in mind that your car is completely out of commission during this time. Once again, time may be worth more than the money you’d pay to a professional if your schedule is already crowded. For the average person with the average setup at home, it doesn’t make a lot of sense to paint your own car if you want a flawless paint job or lead a busy life. That said, a quick brush-over to spruce up your car may just cost you an afternoon, a day’s air compressor rental fee, and...

read more

Achieve Youthful Skin With Peptides

Posted by on May 16, 2016 in Blog, Business | Comments Off on Achieve Youthful Skin With Peptides

Most people will willfully take the wisdom and maturity that come along with aging. However, wrinkled and dull skin are not openly welcome symptoms of growing older. You can age gracefully. While there are a number of products available on the market that claim to be great for helping you maintain a youthful glow, all of these products are only as good as their ingredients. Peptides are an ingredient you don’t want to overlook when searching for skin enhancing options.   Understanding Peptides The formal description of peptides is a protein that has been combined with at least two amino acids, which serve as building blocks for the protein. In terms of skin care, this compound allows the product to yield more dramatic results. When searching for peptides, ideally you want to look for those options made from a synthetic form. The main problem with natural forms is that they are sometimes not as powerful. With a synthetic peptide, the manufacturer has greater control because they have the ability to enhance the potency, or stability, of the peptides within the blend, ultimately making the ingredient more powerful and effective at helping you meet your goals. Benefits Moisture Binding Peptides have inherent moisture binding qualities. One of the greatest defenses against wrinkling is moisturized skin. When skin is dry, it is more susceptible to this type of imperfection. Unfortunately, as you age, a decrease in natural oil production and natural cell renewal paired with years of sun damage make it harder to keep your skin supple and moist. Peptides help bind this moisture to your skin and eliminate much of this concern. Minimize Inflammation On any given day, your skin is exposed to a number of harsh elements. Cigarette smoke, car pollution, and UV rays from the sun are just some of these elements. Although you don’t see the damage, these elements can cause tiny bouts of inflammation on your skin which can cause redness, puffiness, and dark spots. Since the change is gradual, most people don’t even recognize the effect this has had on their skin. Peptides can help reduce this inflammation and its harsh effects. It’s important to note that there is no fountain of youth or miracle product. Beautiful skin at any age is all about effort. Incorporating peptides into a lifestyle that consists of regular exercise, adequate rest, minimal stress, and a healthy diet will yield the greatest results on your skin enhancing journey....

read more

3 Simple Rules For Recreating Vintage Signs For A Retro General Store

Posted by on Apr 26, 2016 in Blog, Business | Comments Off on 3 Simple Rules For Recreating Vintage Signs For A Retro General Store

Whether you live in a tourist destination surrounded by historical sites or just have a knack for nostalgia when it comes to business, a retro-styled general store is bound to be a retail attraction when done right. Even though a general store is all about making available those everyday items people will be looking for in a specific neighborhood or location, creating a retro general store means you are faced with an added layer of planning when it comes to marketing, which heavily relies on the signage you use. There are three simple rules to keep in mind that when you are recreating the vintage signs you need for your place of business.  Go easy on the bright colors.  Signs used in the past were more out of necessity than commodity and were almost always created with simple color tones that were more within reach and inexpensive to create. Stick with neutral colors, such as black and white or grey, for your general store sign’s background. Steer clear of those bright, neon tones that are a common staple for general store signs today. Instead of bright colors to make lettering stand out, use contrasting shades that will provide the same effect, such as white against a black background or grey against a muted red hue. Be careful with the lettering used for wording on your vintage signs. Check out real antique signs from general stores on the internet to get a good idea of what the lettering styles of yesteryear were really like. In general, vintage general store signs would offer up bold block lettering in all capital letters. In some cases, traditional case lettering would offer up simple explanations along the bottom of what customers will find in the store, such as words like “groceries,” “tools,” or “fabrics.” Just remember to keep the lettering simple and clear cut without a lot of frills or font changes.  Make use of creative shaping for the best impression  General store signs of the past were typically lengthy and ovular or just basic rectangles just long enough to house the necessary lettering. When creating your own version of a vintage sign for your general store, follow the same ideas. Go with basic signage shapes with notched corners for added character or flair or just simple rectangles and ovals–either way, your sign will be more resemblant to a general store sign of the past. Take a look at stores like Road Relics to see examples of vintage...

read more

Important Tips To Consider When Choosing A Paper Shredding Service

Posted by on Apr 4, 2016 in Blog, Business | Comments Off on Important Tips To Consider When Choosing A Paper Shredding Service

It is almost impossible to not be be aware of the impact that identity theft has on hard-working Americans every year. In addition, the current HIPAA  laws present with very strict guidelines about protecting the confidential information of patients and there is also the obvious problem of maintaining physical control of years worth of customer, employee and medical records. Therefore, paper shredding is an essential issue for every business to consider and implement. #1-Be Sure That The Paper Shredding Service Complies With The HIPAA Laws   Although any medical facility or health insurance company has been expected to protect the privacy of all individuals with whom they do business for many years,  the HIPAA laws that were passed in the 90’s and improved in the years since has made doing so even more important.  Specifically, since HIPAA laws govern not only how information is maintained in electronic and physical form, but also that records must be safeguarded until disposal,  failing to do so could be problematic for your clients or employees, but also very expensive for you. Unfortunately, the current laws do not specify how you can dispose of that sensitive information. You can shred, burn, pulp or pulverize the records, so that they cannot be reconstructed or accessed again. Burning often provides unfortunate environmental challenges and pulping, whether mechanical or chemical, is often time-consuming.  Pulverizing paper is similarly time-consuming, since it involves both shredding and grinding. Since you would be shredding the paper in order to pulverize it, it seems silly to do more than you need to. Therefore, hiring a professional shredding service is only logical.  #2-Know How FACTA Compliant The Company Is   FACTA, which you may also know as The Fair and Accurate Transaction Act, is applicable to any employer, debt collector and other companies that could logically be given access to client records,such as lenders, landlords and insurance companies. Therefore, you should know that it requires any papers containing consumer information to be shredded in such a way that reassembling it would not be practical. Unfortunately, that rule is vague enough that many consumers have not been adequately protected and companies have been sued, because of that failure. As a result, you should make sure that any paper shredding company that you may be hiring has a good record with protecting the information they are entrusted with. For example, simply shredding the paper is not enough. Instead, it is better to cross-shred it.    In conclusion, paper shredding is vital to protecting the privacy and confidential information associated with the normal administration of almost any business. Therefore, you should be sure to apply the above tips when you are shopping for the most appropriate paper shredding company, such as, for your...

read more

3 Ways To Keep Up On Inventory For Your Company

Posted by on Mar 21, 2016 in Blog, Business | Comments Off on 3 Ways To Keep Up On Inventory For Your Company

Owning a business means having a lot of responsibility. You have to make sure all of your equipment is properly maintained, you always have staff on hand to cover orders, your inventory is accurate, and much more. If even one component is ignored, your business will suffer significantly. When it comes to product inventory, there are a few different ways to make sure everything is in line and your numbers are always accurate. Make sure all products have barcodes on them for easy scanning. One of the first things you need to do to keep track of your inventory and make your life easier is to make sure all of your products have barcodes on them. You can use a handheld scanner to scan each item as it leaves your warehouse to make sure there is a record of what items you have on hand and what items have been sold. The scanner has a built-in feature that allows you to scan an item and find out how many you have on hand at any point in time. Use inventory management software. Another great way to track your inventory is using an automated system. Every time an order is shipped out of your warehouse, your software will update your inventory accordingly to take the right amount of product out of your system. The software allows you to print out reports in mere minutes that allow you to compare your actual numbers to what your computer shows you have. The inventory management software helps to simplify your life and make sure you always have access to information showing what products are selling the best and what ones are sitting in inventory for months on end. Do regular hands-on inventories. Another way to compare what the computer says you have to what you really have is by going around and doing a physical inventory. By putting your hands on the product and physically counting them, you can clear up any discrepancies in what you actually have versus what the computer system thinks you have. This will prevent an order from not being able to be fulfilled and having an unhappy customer who cannot get the products they ordered. By going through the three things above, you can make sure you have an accurate depiction of what inventory you really have in your business at all times. Find out what method works the best for you by experimenting with them and figuring out what suits your needs best. For inventory management, contact a business such as Cargo-Net,...

read more